40A poistka bohate staciiiii ...
To nr1ebw: neaky VWAG Hall ... ???fabia htp???
Beiträge von JRD McLAREN
-
-
-
ABS tam bolo ...
http://89.173.96.22/dohc/c20xe/DSCN1967s.JPG
tu je fotka s "originalnou mechanickou pumpou"
http://89.173.96.22/dohc/c20xe/DSCN1408.JPG
a "homemade" drziak...
http://89.173.96.22/dohc/c20xe/dscn6983s.jpg
http://89.173.96.22/dohc/c20xe/dscn6985s.jpg
..a nefungovalo to ...
-
Alles anzeigen
,,,,,,Das Krümmerrohr vom 1. Zylinder vom C20XE ist da recht nah.
Thomas
und thermostat, wasserslauch, kuhler ...
-
Už to mám par rokov namontované.
Hadica / trubka je upravená tá pôvodná z Nexie (Hansa-Flex auf dem foto)
-
-
who mount valve caps ..?? ( over-pressed..?? )
and who and how anybody insert valves to head and mount valve seals ... ???
-
..aaa kua....
neskoro som to zbadal, som mohol dobehut ...
-
Silverproject ..
-
Is any silicone on "seal galery" ..??
(it look's NO )
someone do this: put some sealant on last bearing cap galery, then mount it ...
..and put some silicone "outside" .. like on your block / foto
or..
mount last cap, and then put some silicone outside ..
..
this is "good for oil leak" ...
the right way to do this propper is: mount last bearing cup (perfectly clean side walls)
then fill the seal gallery with silicone - after it look's as on my foto ..
and the best way to do it:
modify last bearing cup - make two small galleries on the right place
put some liquid sealant on the bottom edge on the block
mount the bearing cup, wait for dry the liquid sealant
and then fill it with silicone
...ale už som ticho ...
